Electronic PRESSURE RELIEF Bypass Damper | 32"-36" Wide Sizes

Electronic PRESSURE RELIEF Bypass Damper | 32"-36" Wide Sizes

Our Price: $453.62

Weight: 40 lbs.

Select Damper W X H 
Quantity: 

32"  / 36" Wide Sizes. Young Regulator 3092 Electronic Bypass Damper. Adjustable Static Pressure Duct Sensor modulates Honeywell Motorized Damper Blades.

 

Young Regulator Model 3092 Electronic Bypass Duct Damper. Combines Duct Pressure Sensing Probe with Static Pressure Control to modulate the Bypass Damper. System is pre-wired at factory.

Duct Probe senses an increase in duct static pressure. The adjustable solid-state Pressure Controller / Motor will begin to modulate the damper open to bypass the excess airflow. Bypass Damper will open until the desired static pressure is attained.

Damper blades will stall and pressure will be maintained until another change in duct pressure occurs. As Zones open and close and duct static pressures changes - the Bypass Damper will respond accordingly.

  • Solid State Pressure Sensor and Controller
  • 15 second short cycling time delay on close
  • Damper Frame - 14 ga Roll Formed Galvanized Steel
  • Damper Blades - 16 ga Galvanized Steel
  • Oil Impregnated Bronze Bearings
  • Temperature Operating Range - 35F to 140F 
  • Motor Torque - 35 in. lb. /  Timing 90 sec
  • 24V  /  0.085 Amps  /  2 watts  /  2.2 VA
  • Low Leak Rubber Blade Seals / Stainless Steel Spring Jam Seals
  • Differential Pressure Set-point Range - .17" wc to 2.0" wc
  • UL Listed  /  NEMA 1 Enclosure

 
 
3092  BY-PASS DAMPER SIZES   W" X H"
32X8 32X10 32X12 32X14 32X16
32X18 32X20 32X24 32X26 32X28
32X30 32X32   36X8 36X10
36X12 36X14 36X16 36X18 36X20
36X24 36X26 36X28 36X30 36X32
36X36  
 
Allow 4 Weeks Order Processing
by Young Regulator
Click for UPS Delivery Transit Time